The technique of the ASR Emitter II exclusive B:
• two channel amplifier in the acrylic casing with input selector and volume control.
• Class A/B technology with 20 Toshiba special Audio-MOSFETS with high impulse-capacity.
• Mounting bars of the output Transistors made from massive brass for low resonance.
• Volume control with relay attenuator in 1dB-Steps with balance and input level adjustment.
• 25 mm LED-Display available in yellow or blue as operational indicator, adjustable in many ways
• 6 high-level-inputs switched with relay, plus 1 direct input, 1 record output.
• Gold plated massive brass RCA-sockets with Teflon isolation. Massive silver-wires for all signals.
• large 100 amperes binding post for cable-shoes and 4 mm banana-plugs.
• 1 plug in slot for Phono – pre amplifier circuit board or balanced input.
• Protection-circuits against overload, Clipping, Short-circuit, Overheating and DC Offset.
• Circuit board with especially strong copper, parts of the two channels in mirror-symmetrical order.
• 2 external power supplies with 3 PM transformers and energy-management, separate rectification for each of the 8 voltages with 2x 32 Schottky rectifiers.
• Especially stable power supply casing of high-quality, very stable steel sheet metal.
• Low loss Neozed high load fuse built in the power supply unit.
• stable industrial power connector from Harting for the connection to the amplifier-part.
• Double shielded connection-cables to the amplifier-part 2m long, on wish other lengths.
• Power cable ASR Magic cord 150 cm with low loss 21A power connector at the power supply.
• high-quality ASR Design remote control made from Corian for all functions. Additionally equipment of the ASR Emitter II Exclusive
• Military ceramic input IC AD 843 SQ, buffering capacitors with total 886.000 uF.
• Balanced input for CD with switchable input impedance.
• feets made from of massive brass for the amplifier unit available in chrome or gold.
• 2 Power supplies with improved equipment for higher performance. The 2x 3 PM transformators are equipped with higher magnetic flux kernel-sheet metal, rectification with 56 Schottky rectifiers.
• A battery power supply for the input stage with 400.000 uF additional Buffer available as an Option.

Emitter II Exclusive Version Blue with black anodized heat sinks	Emitter II Exclusive Version Blue with silver anodized heat sinks
Emitter II Exclusive Version Blue with chrome plated heat sinks (optional)	Emitter II Exclusive with gold plated heat sinks (optional), yellow display

Data for both Emitters :
• Frequency range from 1 to 100.000 Hz with +/-1dB, 20-20.000 HZ +/- 0.2 dB
• Signal to noise ratio at the line input: > 86 dB * Rise time: <0,8 µs
• Distortions: maximal 0,01 % * damping factor: greater than 1000
• Power consumption in Standby: 20 VA, energy mode 90 VA, full power 200 VA

Equipment list of the different versions of the ASR Emitter II exclusive B :
Schottky Rectifier Trafo Sinus 8* Sinus 4* Sinus 2* Driver IC
Emitter II 64 pcs 4x 500 VA 2x 250 2x 450 2x 800 AD843 BQ
Emitter II Exclusive 112 pcs 4x 700 VA 2x 280 2x 490 2x 900 AD843 SQ
Emitter II Excl Batt 112 pcs 4x 700 VA 2x 280 2x 490 2x 900 AD843 SQ
Buffering capacity : Input 16V Driver 96V Output 78V Control 12V Total
Emitter II 152.000 uF 62.000 uF 302.000 uF 70.000 uF 586.000 uF
Emitter II Exclusive 152.000 uF 62.000 uF 602.000 uF 70.000 uF 886.000 uF
Emitter II Excl Batt 406.000 uF 62.000 uF 602.000 uF 70.000 uF 1140.000 uF

Dimension and weight : width x depth x height, depth at the power supply with plug in brackets
Emitter II : Main unit : 57 x 47 x 23 cm, 44 kg, 2x Power supply 46 x 32(42) x 16 cm, 31 kg
Exclusive : Main unit : 57 x 47 x 23 cm, 47 kg, 2x Power supply 46 x 32(42) x 16 cm, 32 kg

Emitter I & II New 2016 Complete Re-designed

Emitter I & II New 2017 Display, Nubs and Heat-sinks Photos