The ASR Emitter amplifiers combine two worlds in one amplifier :
The emotional sound of the Tube with the Power and Precision of the
Transistor !
Therefore the ASR Emitter are built different to most other common
amplifiers :
ASR Emitters are main-amplifiers with input-selector and volume control
you dont need a preamp.
The power supplies have separate compartments, the input-, driver-, and
output-stages have their
own supplies each with separated rectification and generous buffering with
many capacitors.
The volume is regulated with relays, the casings are made out of tonally
neutral acrylic.
With the ASR Emitter you can listen many hours totally relaxed !
|
|
The ASR Emitter I is available in two versions : Emitter I and Emitter I
Exclusive :
The ASR Emitter I is well equipped with expensive parts for his price and
the ideal amplifier for a high-quality High End setup especially with very
demanding loudspeakers with critical impedance curves.
With the sum of his special technical solutions, the ASR Emitter I is a well
available part for high class
High End equipment for your home.
The ASR Emitter I Exclusive is even better equipped and the right amplifier
for the Hifi Connoisseur,
that asks for even higher resolution of fine details and even more precise
sound picture.
The Dimensions of the ASR Emitter I Exclusive allow a good integration in
you living rooms.
All possible improvements of the ASR Emitter I are built-in in the ASR
Emitter I Exclusive.
The ASR Emitter I Exclusive has a very fast and by this alive Sound
picture with perfect resolution
of finest details. Through his extremely high speed, the Emitter reproduces
the three-dimensionality
of good records genuinely into your hearing-space.
The sound of the ASR Emitter I Exclusive remains relaxing and homogeneous.
With the optional battery power supply the ASR Emitter I Exclusive sounds
even more relaxed -
the three-dimensionality of good records become even more precise, the
interpreters stand stable at certain places, finest details like the "air"
around the instruments become perceptible.
|
|
The technique of the ASR Emitter I exclusive B:
two channel amplifier in the acrylic casing with input selector and volume
control.
Class A/B technology with 12 Toshiba special Audio-MOSFETS with high
impulse capacity.
Mounting bars of the output Transistors made from massive brass for low
resonance.
Volume control with relay attenuator in 1dB-Steps with balance and input
level adjustment.
25 mm LED-Display available in yellow or blue as operational indicator,
adjustable in many ways
6 high-level-inputs switched with relay, plus 1 direct input, 1 record
output.
Gold plated massive brass RCA-sockets with Teflon isolation. Massive
silver-wires for all signals.
large 60 amperes binding post for cable-shoes and 4 mm banana-plugs.
1 plug in slot for Phono pre amplifier circuit board or balanced input.
Protection-circuits against overload, Clipping, Short-circuit, Overheating
and DC Offset.
Circuit board with especially strong copper, parts of the two channels in
mirror-symmetrical order.
External power supply with 3 PM transformers and energy-management,
separate rectification
for each of the 8 voltages with 32 Schottky rectifiers.
Especially stable power supply casing of high-quality, very stable steel
sheet metal.
Low loss Neozed high load fuse built in the power supply unit.
stable industrial power connector from Harting for the connection to the
amplifier-part.
Double shielded connection cable to the amplifier-part 2m long, on wish
other lengths.
Power cable ASR Magic cord 150 cm with low loss 21A power connector at the
power supply.
high-quality ASR design remote control made from Corian for all functions.
Additionally equipment of the ASR Emitter I exclusive B:
Military ceramic input IC AD 843 SQ, buffering capacitors with total
570.000 uF.
Balanced input for CD with switchable input impedance.
feets made from of massive brass for the amplifier unit available in
chrome or gold.
Power supply with improved equipment for higher performance. The 3 PM
Transformators are equipped with higher magnetic flux kernel-sheet metal,
rectification with 56 Schottky rectifiers.
A battery power supply for the input stage with 400.000 uF additional
Buffer available as an Option.
Data for both Emitters :
Frequency range from 1 to 100.000 Hz with +/-1dB, 20-20.000 HZ +/- 0.2 dB
Signal to noise ratio at the line input: > 88 dB * Rise time: <1 ΅s
Distortions: maximal 0,01 % * damping factor: greater than 600
Power consumption in Standby: 10 VA, energy mode 50 VA, full power 120 VA
Equipment list of the different versions of the ASR Emitter I exclusive B:
Schottky Rectifier Trafo Sinus 8* Sinus 4* Sinus 2* Driver IC
Emitter I 32 pcs 2x 500 VA 2x 140 2x 250 2x 450 AD843 JN
Emitter I Exclusive 56 pcs 2x 700 VA 2x 160 2x 290 2x 520 AD843 SQ
Emitter I Excl Batt 56 pcs 2x 700 VA 2x 160 2x 290 2x 520 AD843 SQ
Buffering capacity : Input 16V Driver 80V Output 63V Control 12V
Total
Emitter I 86.000 uF 42.000 uF 122.000 uF 40.000 uF 290.000 uF
Emitter I Exclusive 86.000 uF 42.000 uF 402.000 uF 40.000 uF 570.000
uF
Emitter I Excl Batt 406.000 uF 42.000 uF 402.000 uF 40.000 uF 890.000
uF
Dimension and weight : width x depth x height, depth at the power
supply with plug in brackets
Emitter I : Main unit : 42 x 42 x 18 cm, 19 kg, Power supply 46 x
32(42) x 16 cm, 31 kg
Exclusive : Main unit : 42 x 42 x 18 cm, 22 kg, Power supply 46 x
32(42) x 16 cm, 32 kg
Emitter I & II
New 2016 Complete Re-designed
Emitter I & II New 2017 Display, Nubs and Heat-sinks
Photos
|