Cartridges:
palladian
|
| | | the
fideles
Palladian
Reference Hi-End Cartridge:
designed by the
company specializing in high-end phono solutions only
A recording captures a moment in time.
A
single event.
Something that once happened in space and time.
Something that happened once live.
The fact – and sense - that most every recording contains music once created
actually
in something we call live is all too often missing
when we play back that
recording.
When we
introduced the aiwon in early winter 2014 we were
amazed by its subtle detail, by its ability
to recreate tiny, tantalizing details – minor details which so immensely
support the emotional impact and the sense of reality in a sonic picture.
Over the
next 18 months we experimented with a few samples of the aiwon
trying to further fine tune for even more
impact in performance.
But it was not before we made subtle changes in some key inherent design
parameters that we entered new ground.
This
was the birth of the design which then evolved in the spring of 2016 into
the palladian.
The
palladian features a hand hammered Timet 1100 Titanium
body of
unequalled strength and with an unparalleled ability to transfer energy.
In the
palladian we find a strong heart with more energy (coil
windings), a body more agile with less
inertia (reduced moving mass), featuring further a very special, subtle mix
of small measures taken to fine tune each and every parameter of performance
allowing for a sonic explosion beyond our expectations and hopes.
The hand hammered body, the quick silverish shine like a dragon’s skin - The
palladian Timet 1100 body expresses visually its agility, vital
dynamic and live-likeness.
The
palladian brings that spark of live back
into the sonic presentation of each
and every recording.
That spark
of live – independent whether large or
small – that was there when the
performance was once captured.
The
palladian is fast, live-like
dynamic and breathtaking direct in its color,
immediateness and agility.
An incredible agile, dynamic dancer – a reminiscent of Misha Baryshnikov in
his prime.
It is subtle, tender and sublime – yet frightening dynamic, with a sonic
punch both wall-shaking and stunning physical in its impact.
The
palladian is.. live …..
in the very best sense and in the true spirit of the
music.
And
with the palladian the true spirit of
the music is there.
Our
statement in phono cartridges ….. our best.
aiwon LOMC Cartridge:
aiwon LOMC - low output top end moving coil cartridge
the cartridge designed by the company which specializes in high-end phono
solutions only
|
It is with quite a proud feeling of satisfaction and excitement that we
present the aiwon©
(ancient greek "the eternal principle of play").
This is our statement regarding low output moving coil phono cartridge
design.
It shares the same general architecture with it's smaller brother - the
archon©.
It however displays and incorporates a bundle of different improvements in
most vital parts - some easy to spot, some very subtle and hidden - in micro
design, material composition, individual fine-tuning and - ultimately ... -
sonic performance.
The aiwon© is the best example for what improvement is still possible in
phono analog front-end sonic performance.
Possible only if all parameters are carefully fine-tuned.
Fine-tuned to thus create much more than the mere sum of the parts.
The aiwon© is "old school" at its very finest.
A sonic performance second to none, - featuring a live-likeness, dynamic
contrast, emotion expression and "you are there" character one has to hear
to realize what was missing so far - missing in even the very best set-ups.
The aiwon© is carefully handcrafted in Bavaria.
Each aiwon© is handcrafted and carefully fine-tuned to ultimate performance
by one person only.
All the perfromance of your analog set-up starts here - in the groove - with
the cartridge.
Give the aiwon© a listen in your personal set-up - it will enrich your
listening pleasure and musical enjoyment beyond your expectations.
The aiwon© will show you what your audio system is really capable of.
Technical Parameters:
* 0.28 mV output * high purity 5N silver coils * ultra-rigid special
dampened titanium "Timet 1100" corpus * * static compliance 16-18 mm/N (18°C
to 30°C) * 17 mN recommended tracking force * * channel balance better 0.35
dB / at 1 kHz * channel separation better 32 dB * * frequency response 15 Hz
to 32 kHz +/- 2 dB * Q4 Shibata EVO stylus * * internal resistance 4 Ohms *
load resistance 100 Ohms * * cantilever C37-coated tempered aluminum * *
cartridge weight only 11.5 grams *
astron LEMC Cartridge:
the astron© - high-end moving coil cartridge
the cartridge designed by the company which specializes in high-end phono
solutions only
|
the astron ........ a cartridge which represents the selected very best of
the archon production series. The most cartefully selected archons - picked
for homogenous frequency response and extremely close matching channels -
are transferred into the special housing featuring a constellar pattern
handcrafted with pure 24kt Gold inlays.
Inside the astron features additional dampening in 3 important points for
advanced resonance control and an extra "quietness" in sonic background.
The astron is a limited edition high performance cartridge by nature.
Only 18 samples are made each year - only 18 astrons do feature the same
star pattern on the Timet 1100 body.
The "Capricorn" is sold out.
The "Lion" is currently available in very limited numbers.
These are the "best of the best" of the archon - taken to new sonic heights
and fine-tuned to the utmost.
Creating a cartridge which may well be viewed by many as the best possible
choice for listening to classical music.
The astron gives a sonic picture as if you were the music supervisor.
Being relaxed, supreme and alway in easy control - pushing one to listen
endlessly.
Technical Parameters:
* 0.5 mV output * silver coils * ultra-rigid special dampened titanium "Timet
1100" corpus with 24ct Gold inlays* * static compliance 17-19 mm/N (18°C to
30°C) * * 16 to 20 mN tracking force range * 17 to 18 mN recommended
tracking force * * channel balance better 0.5 dB / at 1 kHz * channel
separation 28 dB * * frequency response 15 Hz to 32 kHz +/- 2 dB * Shibata
EVO stylus * * internal resistance 8 Ohms * load resistance 40-1000 Ohms * *
cantilever C37-coated tempered aluminum * * cartridge weight only 11.5 grams
*
the astron© is a very-easy-to-mate-with partner for all modern tonearms and
an easy match for phono stages.
the astron© is an individual numbered limited edition low-output moving coil
cartridge assembled and fine-tuned by hand and designed in Bavaria /
Germany.
archon MOMC Cartridge:
the archon© - high-end moving coil cartridge
the cartridge designed by the company which specializes in high-end phono
solutions only
|
|
|
the archon© in its walnut / leather
dedicated presentation box. |
the archon© time-aligned moving coil phono cartridge is a new design.
Featuring an unique designed uni-body made from a solid block of Timet 1100
- an ultra-strength Titan-alloy. Internal liquid dampening at certain areas
provides an unique energy transfer ability to conserve and bring to your
ears even the finest and smallest details in sound. Thus enriching the sonic
picture with rarely heard inner harmonics and ambiance nuances.
the archon© provides a sonic picture which is live-like and tantalizing in
its openness, vital detailed and rich in its harmonic structure. A very
natural, colorful sound - with an outstanding reproduction of human voices
and the most realistic timbre. Opening a soundstage which is wide and
recreating excellent the recording venue - with organic placement and wide
inner dynamics.
technical parameters:
* 0.5 mV output * silver coils * ultra-rigid special dampened titanium "Timet
1100" corpus * * static compliance 17-19 mm/N (18°C to 30°C) * * 1.6 to 2.0
mN tracking force range * 1.8 mN recommended tracking force * * channel
balance better 0.5 dB / at 1 kHz * channel separation 28 dB * * frequency
response 15 Hz to 32 kHz +/- 2 dB * Shibata EVO stylus * * internal
resistance 8 Ohms * load resistance 40-1000 Ohms * * cantilever C37-coated
tempered aluminum * * cartridge weight only 11.5 grams *
the archon© is a very-easy-to-mate-with partner for all modern tonearms and
an easy match for phono stages.
the archon© is an individual numbered limited edition low-output moving coil
cartridge assembled and fine-tuned by hand and designed in Bavaria /
Germany.
the archon - unique uni-body with additional overhang
adjustment-option incorporated in cartridge body.
the fideles HOMC Cartridge:
We herewith proudly introduce the fideles - an all-new
high-end phono cartridge.
„fideles“ derivates from Latin / German and stands for „faithful, - as well
as agile and lively“.
Unusual in this price class, the fideles features a solid advanced Titanium
Timet 1100 body of unparalleled energy transfer ability and unique
combination of strength and light weight.
The generator system is a double-magnet - focused field - moving ferrum pipe
- principle which gives a healthy high output of 5.5 mV.
Very easy handle for any phono stage and no need for a high-gain / moving
coil phono input.
Any phono input with 35 to 50 dB gain and 47k to 100k impedance is fine.
The fideles’ Titanium body further features 3 rows of threads to allow
perfect overhang in any headshell / tonearm.
The fideles produces a very dynamic, live-like, colorful, open, transparent
and natural sound and performs solidly several steps above it’s price range.
It features very high trackability - above 90 µm! - and is very easy to
align.
It’s relatively low body mass allows perfect synergy with a very wide
selection of low to medium-high mass tonearms.
It easily rivals - not just in terms of it’s cnc’ed Titanium body - high end
cartridges in the price range of 2000 to 3500 US$ retails.
The fideles has a world-wide retails price target of around US$ 1200 / EURO
990.
The fideles was designed to set a new standard in the US$ 1200 to 2000 -
price range of phono cartridges - in terms of technical input, value for
money and performance alike.
the fideles - the technical specifications
frequency
response |
18 Hz – 25 kHz +/- 2
dB |
channel
balance |
within 0.8dB @ 1kHz |
channel
separation |
better than 25dB @
1kHz |
output
voltage |
5.5 mV, 1kHz @ 5
cm/sec |
static
compliance |
35 mm/N |
dynamic
compliance @ 9-10 Hz |
17 mm/N |
vertical
tracking angle |
22° |
stylus |
true elliptical 7µ x
2.5µ |
|
factory-replaceable |
recommended
load resistance |
47 -100 kΩ |
recommended
load capacitance |
phono cable + 0-max
200pF |
|
|
|
|
cartridge
body mass |
10.5 g |
|
|
|
|
recommended
tracking force |
17 mN to 18 mN |
|