FINEST ANALOG DEVICES
The name Morch stands for
tonearms with outstanding quality among classicists. Morch tonearms are
mechanically very stable. They are the result of best mechanics and
craftsmanship in perfection, made to satisfy highest technical and
audiophile whishes. Moerch toenarms come in 4 masses, 9 inch or 12
inches, and in precision (bigger headshlee) or standard headshells. All
tonearm-parameters are adjustable. This ensures that you can optimize
the performance of your cartridge. There is nothing more flexible!
|
Morch DP-6 Precision Gold
|
Morch UP-4 Chrom |
Due to exchangeable armwands, which differ in 4 weight versions, it is
possible to reach a perfect mass proportion between tonearm and
cartridge. In most of the cases it is possible to adjust the resonance
of depth in the perfect spectrum between 8 and 13 Hz.
Green: actual weight: 3,80g
Red: actual weight:5,70g – also available as 12” tonearm
Yellow: actual weight: 7,40g
Blue: actual weight: 13,10g - also available as 12” tonearm
Red: precision tonearmpipe: 5,70 g
Blue: precision tonearmpipe: 13,10g |
|
|
MORCH DP-6:
The top model DP-6 has a unique combination from high precision bearing
(for the horizontal movement) and a 2-point sapphire-spikebearing (for
the vertical movement). The bearing point is at the same height like the
surface of the record, which means there are no tone pitch variations by
vertical movements of the arm (billowy records). A clock spring produces
the antiskating force and can be adjusted during playing.
The essential corrections to the inner areas happen automatically. Three
adjustment weights , which are different heavy, and one pressing weight
make it possible to achieve a perfect mass at the fulcrum of the tonearm.
The cables on the inside are from Teflon-coated silver. The cable to the
phono amplifier is made from extremely pure, silvered copper. Available
in chrome and 24 carat gold.
|
MORCH UP-4:
A ingenious one-point design with sapphire bearing using the spike
principle, which can be damped with silicone fluid at any time.
Due to the low centre of gravity, it is very stable against commuting
compared to other one-point constructions.
Like the DP-6 this tonearm has the same antiskating mechanism and is
equipped with 3 adjustment weights and a pressing weight.
The cables on the inside are from Teflon-coated silver. The cable to the
phono amplifier is made from extremely pure, silvered copper. Available
in chrome and 24 carat gold.
|
|
DP-6 with "Precision" pipe
UP4 with "Standard" pipe
|
Technical facts
:
Distance between axis: 212 mm
Overhang : 18 mm
Actual length: 230 mm
Offset angel: 24°
Mounting hole: 20 mm
Lateral tracking error 0: 66 mm/120,9 mm
Friction of bearing: Lower than 0,04 mN
Position of bearing: height of records
Damping: as necessary
Adjustment: weights 4
Version of tonearmpipes: 8
Antiskating : use a clock spring
Finish: Chrome or24 carat gold |
|